Search Filter
Search Filter
Sort Listings By
Show Only
By Customer Review
Licence Type

Libraries & Classes

Results 21-40 of 59
HS NMEA GPS C Source Library 1.0
HS GPS is a software library (with full C source code) which provides access to a NMEA-183 compliant GPS receiver via a serial communications port, decoding NMEA sentences: $GPGGA, $GPGSA, $GPGSV, $GPGLL, $GPRMC and $GPVTG. Decoded parameters include: time, date, position, altitude, speed, course and heading, according to standard - NMEA-183 (National Marine Electronics Association, Interface Standard 0183.)
(6 ratings)
Reviews0
PriceFree
Views2304
HS X.25 C Source Library
HS X.25 is a software library in C (supplied with full source code) which implements ITU-T recommendation X.25 - Interface between Data Terminal Equipment (DTE) and Data Circuit-terminating Equipment (DCE) for terminals operating in the packet mode and connected to public data networks by dedicated circuit. Includes HsDL (Data Link) and HsSock (Winsock interface) for X.25 over IP applications (XOT))
(0 ratings)
Reviews0
PriceFree
Views1503
HS XMODEM C Source Library
HS XMODEM is a software library in C (supplied with full source code) that provides a programmer with the off-the-shelf support for XMODEM protocol data transfer capability. Support for both sender and receiver are provided. Other features include 1024 block size vs 128, CRC vs checksum, configurable timers and retries.
(0 ratings)
Reviews0
PriceFree
Views1351
HS GSM SMS C Source Library
HS GSM SMS is a C source library that provides a PC-based user application with access to a mobile phone's Short Message Service (SMS) functionality, according to ETSI standards: GSM 07.05 (ETS 300 585) - "Use of Data Terminal Equipment - Data Circuit terminating; Equipment (DTE - DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS)" GSM 03.40 - "Technical Realization of Short Message Service - Point-to-Point
(0 ratings)
Reviews0
PriceFree
Views1834
Equation Parser
This is a C++ equation parser which implements the reverse polish notation under the hood. It's quick, small, and efficient. The cpp equation parser supports the following operator and follows operator precendence: '()*^-+/' it can easily be extended to accomodate more.
(6 ratings)
Reviews0
PriceFree
Views1386
C++ Fraction class
This is a very simple fraction class which allows you to keep those decimals in radical form rather than decimal.
(0 ratings)
Reviews0
PriceFree
Views948
E-XD++MFC Library Professional
E-XD++ MFC Library Professional Edition is a MFC/C++ framework for developing Microsoft Visio like interactive 2D graphics and diagramming applications. E-XD++ stores graphical objects in a node (scene) graph and renders those objects onto the screen. E-XD++ product supports both vector and raster graphics on the drawing surface.with E-XD++ Enterprise you can easily build Visio 2003 like applications within minutes!
(0 ratings)
Reviews0
PriceUSD 1,680.00
Views941
E-XD++MFC Library Enterprise
E-XD++ MFC Library Enterprise Edition is a MFC/C++ framework for developing Microsoft Visio like interactive 2D graphics and diagramming applications. E-XD++ stores graphical objects in a node (scene) graph and renders those objects onto the screen. E-XD++ product supports both vector and raster graphics on the drawing surface.with E-XD++ Enterprise you can easily build Visio 2003 like applications within minutes!
(0 ratings)
Reviews0
PriceUSD 1,980.00
Views928
MySharpEbook - Use C# to Build eBooks
Would you like to create your own e-book, e-brochure, e-catalog, e-magazine, e-newsletter using Visual C#? Use this C# source codes to create customized e-publications for any occasion or recipient. The registered version of this package contains the full example source codes for a complete Visual C# program that shows you how to create your own e-publications which you can distribute in the form of an executable program.
(0 ratings)
Reviews0
PriceUSD 24.95
Views1814
dtSearch Publish
* 25+ fielded & full-text search options * dtSearch’s own document filters highlight hits in popular file types * Optional API supports .NET, C++, Java, SQL, etc. dtSearch "covers all data sources"--eWeek; "Lightening fast"--Redmond Mag. See www.dtsearch.com for hundreds of reviews & case studies; fully-functional evaluations
(0 ratings)
Reviews0
PriceUSD 2,500.00
Views832
TextCaptureX
TextCaptureX is a COM library that allows screen text extraction in Windows applications.It is accessible from any COM aware programming languages. You can use it to extract text from any application that doesn't provide communication API's in order to feed another program. You can also use it to extract text from legacy systems, file directories, status bar messages, Windows error messages and more. TextCaptureX is not OCR based so it's incredible fast. So it's convenient to embed it into dictionaries or translation tools. Imagine: your customer captures any text on screen, even when copy/paste is not available, with a hotkey and with a mouse click your dictionary pops up with the text already translated/explained. We provide C++, Visual Basic and C# samples into the trial version in order to demonstrate the text capture library features.
(3 ratings)
Reviews0
PriceUSD 39.50
Views1157
COMM-DRV/CE
COMM-DRV/CE is a professional serial communication library for Windows/CE & Pocket PC. It supports ZModem, YModem, and XModem file transfer protocols as well as modem communication. COMM-DRV/CE does not require that you have a Pocket PC to develop serial communication applications. It was developed with eMbedded Visual C++ 3.0 which includes a Pocket PC emulator that behaves virtually identically to any of the Pocket PCs on the market today. Moreover we have included the DLLs necessary to support both the emulator as well as the actual Pocket PC devices. Major Features: *Support Visual eMbedded C++ 3.0. *Complete source code provided. *Targets devices based on Windows CE 2.11 and Windows CE 3.0. *Compatible with: Pocket PC 2002 Pocket PC 2003 Pocket PC 2003 2nd Edition Smartphone 2002 Smartphone 2003 Smartphone 2003 2nd Edition *Support for ALL Hayes compatible modems (AT command set). *Supports ALL single or multiport cards made for Pocket PC & *Windows/CE devices. *Multiple ports may be active at the same time. *Built-in hardware and software handshaking for flow control (DTR/DSR, RTS/CTS, XON/XOFF). *Adjustable communication buffers of any size. *Support any baud rate in excess of 460K baud that is supported by the underlying hardware. *File transfer libraries allow Xmodem, Ymodem, and Zmodem file transfers on multiple ports at the same time. *On line help.
(0 ratings)
Reviews0
PriceUSD 99.95
Views998
E-mail Validation for .net
PatNorSoft Email Validation is a true native 100% managed class that can be implemented for both Webforms and Winforms. It checks email in two steps: 1- Check if the email has a valid syntax. 2- If it is valid then proceed with a special DNS look-up to check the validity of the email address. Although email validation can't be 100% foolproof, WebStorm Email Validation Component can cut off bad email addresses up to 80% in you database.
(0 ratings)
Reviews0
PriceFree
Views951
StimulReport.Net
StimulReport.Net is a powerful reporting tool that helps you design flexible, feature-rich reports. It's a suite of 100% managed .NET components written in C#. Our product is compatible with VisualStudio.Net. StimulReport.Net is fully using all abilities of .Net Framework. Package includes the report designer that is available for an end-user. It lets you create and modify report templates and rendered documents. StimulReport.Net is recommended both for a simple report rendering and for an unlimited complexity report rendering. Our product is runtime royalty free. StimulReport.Net includes source codes. Creation and using reports with StimulReport.Net is simple, quick and clear.
(0 ratings)
Reviews0
PriceFree
Views702
StimulControls.Net
StimulControls.Net is a collection of 100% native .NET framework managed controls written in C#. All controls distribute with source codes. The collection allows developers to create high-quality applications with a cool design. The package contains DockingManager, Button, CheckBox, RadioButton, ComboBox, GroupBox, ListBox, TextBox, TabControl, ButtonEdit, ColorBox, FontBox, MenuProvider, NumericSpinEdit, OutlookBar, ToolBar, TreeViewBox, TreeView, and GroupBox components. StimulControls.Net distribute in two editions: Free Edition and Commercial Edition.
(0 ratings)
Reviews0
PriceFree
Views815
Active Audio Record Component
Directly record audio to wav, mp3, wma, ogg, vox, au and aiff format on the fly without temporary files created. Support multiple sound cards and mixer lines Set volume level for mixer line Silence detection during recording. Get audio channel volume level Examples in VB, VBScript are provided,
(0 ratings)
Reviews0
PriceFree
Views810
RTF to HTML DLL .Net
The RTF-to-HTML DLL .Net is a robust and independent .Net assembly to convert Text, RTF documents into HTML/XHTML documents with CSS. The component is 100% created in managed C# and absolutely standalone. It does not require MS Office or any other word-processor. The component offers full formatting support, allowing you to retain various formatting options from your original RTF files. This includes support for font styles, faces and sizes.
(0 ratings)
Reviews0
PriceUSD 239.00
Views1239
Client / Server Comm Library for C/C++
Client/server component C++ library for TCP/IP and UDP/IP sockets communication across a network such as the internet or intranet (LAN). Allows multiple servers and clients to run simultaneously. Servers can handle multiple connections concurrently. Create client / server file transfer. Create proxy, chat, file transfer, HTTP, SMTP, POP3, FTP and DNS client programs. Create SMTP proxy programs extracting a copy of all recipient addresses.Create POP3 proxy programs that filter incoming email for Spam. Secure and private messaging. Supports "one time" passwords for improved security. Data and files can be encrypted and decrypted. Specify the maximum number of connections that the server will accept when listening on any one port. Multiple examples and 43 functions to create 32-bit and 64-bit client server applications. Works with C++, C#.NET, Visual Studio, MFC and C++ Builder. License covers all programming languages. Royalty free. Works with Windows 95/98/Me/NT/2000/2003/XP/Vista/Win7
(0 ratings)
Reviews0
PriceUSD 115.00
Views1705
Winsock Interface Library for C/C++
The Winsock Interface Library simplifies winsock network communications programming and provides support for the most common Internet protocols such as Finger, SMTP, POP3, FTP, NNTP, and HTTP. Includes multiple C/C++ examples. Requires MS, Borland, Watcom, or LCC-Win32 Windows C/C++ compiler.
(0 ratings)
Reviews0
PriceFree
Views1342
Lazarus Registration Component
A simple DLL that lets you add a registration feature to your shareware application or installation script. Includes DLL, definitions file to import into your development environment, and examples of how to use it in NullSoft installer program. Now also includes a graphical registration tool for generating customer keys.
(0 ratings)
Reviews0
PriceUSD 25.00
Views779
Results 21-40 of 59